MW600 - Standard Portable Dissolved Oxygen Meter
The MW600 is a Portable Dissolved Oxygen meter ideal for use in education, labs, aquaculture, environmental, wastewater treatment or pond and stream management.
SKU:
MW600
Manufacturer part number:
MW600
The MW600 is a Portable Dissolved Oxygen meter ideal for use in education, labs, aquaculture, environmental, wastewater treatment or pond and stream management. Anywhere accurate Dissolved Oxygen measurements are important and where Oxygen levels are continuously monitored to obtain optimal performance.
The MW600 calibrates using an easily “open air” 2 points procedure ( see video or technical tips links for both temp comp procedure and “open air” calibration procedure ). An optional carrying case is available model # MA750.
MW600 is supplied complete with MA840 D.O. polarographic probe which has a 3 m cable, calibration screwdriver, 5 spare membranes, a starter bottle of electrolyte solution for filling the membrane (model # MA9071s @ 20 mL) additional liquid will be needed model # MA9071, 9 volt battery and instructions.
SPECIFICATIONS |
O2 Range |
0.0 to 19.9 mg/l |
O2 resolution |
0.1 mg/l |
O2 Accuracy |
±1.5% Full Scale |
Calibration |
manual on 2 points (zero and slope) |
Temperature Compensation |
automatic, from 0 to 30°C |
Probe |
MA840 (included) |
Environment |
0 to 50°C / 32 to 122°F; max RH 95% |
Battery Type |
1 x 9V alkaline (included) |
Battery Life |
approx. 70 hours of continuous use |
Dimensions |
145 x 80 x 40 mm |
Weight |
220 g (with battery) |
|
ACCESSORIES |
MA9070 |
Zero Oxygen Solution, 230 ml bottle
|
MA9071 |
Refilling Electrolyte Solution, 230 ml bottle |
MA840 |
Polarographic D.O. probe with 3 meters cable |
MA841 |
Spare membrane (5 pcs) |
MA6370 |
Protective hard shell case |
|
ORDERING INFORMATION |
MW600 is supplied complete with MA840 D.O. polarographic probe which has a 3 m cable, calibration screwdriver, 5 spare membranes, a starter bottle of electrolyte solution for filling the membrane (model # MA9071s @ 20 mL) additional liquid will be needed model # MA9071, 9 volt battery and instructions.
|
|