Monitor MC1K - Analog Radiation Detector
The new ergonomic MC1K is a handheld survey meter using a built-in energy compensated GM detector.
Manufacturer part number:
The MC1K is an ergonomic handheld survey meter using a built-in energy compensated GM detector. It detects gamma and x-rays up to 1000 mR/hr over 4 selectable ranges. The energy compensated Geiger counter affords the detector a more linear response to gammas and x-rays over the full range. A beep sounds and a count light flashes with each event detected.
Applications & Uses: Expanded Range up to 1000 mR/hr, Linear Response needs with Energy Compensation, Checking accelerator & x-ray shielding for leakage, Checking industrial gauges; such as moisture, density, or level gauges containing Cesium-137, Locating lost sources, Personal protection, General surveying
Energy compensated halogen-quenched GM tube.
X1 position 0 – 1 mR/hr or 0 – 0.01 mSv/hr
X10 position 1 – 10 mR/hr or 0 – 0.1 mSv/hr
X100 position 5 – 100 mR/hr or 0 – 1 mSv/hr
X1000 position 50 – 1000 mR/hr or 0 – 10 mSv/hr
X1, X10, X100, X1000.
MC1K Energy Sensitivity
Detects gamma and x-rays down to 40 keV. Response is flat from 40 keV up. Normal background, approximately 4 CPM.
Reference to Cs137
Typically ±15% from factory, ±10% with NIST Source Calibration NIST Calibration Additional
Meter will hold at full scale in fields as high as 100 times the maximum reading.
Internally mounted beeper (can be turned off for silent operation).
3.5 mm jack with pulse out.
9-volt alkaline battery (included). Approx. 2,000 hrs at normal background radiation levels.
-10° to +50°C (14° to 122°F)
10% to 70% Non-Condensing.
217 g (7.7 oz)
209 x 71 x 50 mm (8.2 x 2.8 x 1.9 in.)
Observer Serial Software, NIST Calibration
1 year limited warranty
Included with MC1K