Disclaimer :
The picture shown may or may not be accurate based on what was available from the manufacturer. Please make your decision for the purchase of the product based on the detailed description. If you need additional information please contact our customer service department.

MC410 - TDS Monitor

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.

Manufacturer: Milwaukee Instruments

SKU: MC410

Manufacturer part number: MC410

Vendor: Milwaukee Instruments

$90.00

Qty:

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

TDS - PPM Monitor

User selectable Hi/Low Set Point
Manual 1 point calibration
Visual LED alarm
Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
MA81/2 PPM Probe with 2m cable (BNC connector)

SPECIFICATIONS
Range	0 - 1990 ppm
Resolution	10 ppm
Accuracy	±2% Full Scale
Setpoint range	700 - 1800 ppm
Calibration	Manual 1 point
Alarm	Active when reading is higher or lower than set point
Probe	MA812/2 (included)

ACCESSORIES
M10031B	1413 µS/cm calibration solution, 20 ml sachet (25 pcs)
M10032B	1382 ppm calibration solution, 20 ml sachet (25 pcs)
M10039B	5.00 mS/cm calibration solution, 20 ml sachet (25 pcs)
M10442B	1500 ppm calibration solution, 20 ml sachet (25 pcs)

ORDERING INFORMATION
MC410 is supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution.

Product tags

lab instrumentation (142)