MC310 - Conductivity Monitor
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.
SKU:
MC310
Manufacturer part number:
MC310
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
Professional EC - Conductivity Monitor
- User selectable Hi/Low Set Point
- Manual 1 point calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml 1413 µS/cm calibration solution
- MA811/2 EC Conductivity Probe with 2m cable (BNC connector)
SPECIFICATIONS |
Range |
0.0 - 10.0 mS |
Resolution |
0.1 mS/cm |
Accuracy |
±2% Full Scale |
Setpoint range
|
1 - 5 mS |
Alarm |
Active when reading is higher or lower than set point |
Probe |
MA812/2 (included) |
|
ACCESSORIES |
MA811/2 |
Conductivity probe with 2 m cable |
M10031B |
1413 µS/cm calibration solution, 20 ml sachet (25 pcs) |
M10032B |
1382 ppm calibration solution, 20 ml sachet (25 pcs) |
M10039B |
5.00 mS/cm calibration solution, 20 ml sachet (25 pcs) |
M10442B |
1500 ppm calibration solution, 20 ml sachet (25 pcs) |
|
ORDERING INFORMATION |
MC310 is supplied with 12 VDC adapter, mounting kit, and 20ml 1413 µS/cm calibration solutio.
|
|